ACS 2010

ACS 2010 Single Audio Mixer Panel

Utilizing state of the art surface mount technology, the ACS 2010 packs high performance audio and ICS into an unbelievably small package size. Measuring just 1.5" in height and 5" in depth, the Dzus mounted ACS 2010 conserves valuable instrument panel space yet still offers the cockpit crew numerous features. The most unique of these features is the QUICK ADJUST receive audio volume control, which allows for individual selection and volume level control for each of the receive audios.

The ACS 2010 is ideal for use both individual and multi-user installations, and is currently being used in Law Enforcement, Forestry, EMS, and Utility applications. As with all Air Comm Audio Panels, the ACS 2010 is approved for use on USFS contracts.

Product Features

	Compact Dzus mount - 1.5" high
	PTT and HOT ICS modes
	5 Transmit positions plus PA
	5 Receive Audio selections
	QUICK ADJUST Receive Audio
	ICS Bus/RX audio for pass expansion
	Emergency mode operation
	Internal interface for non-aircraft radios
	14 or 28VDC operation
	Custom panel legends
	Color coded knobs and toggle switches
	Connector installation kit (crimp) incl.
	1-Year Full Warranty
	Approved for use on USFS contracts

Options

	VOX
	Private ICS Bus
	NVG lighting
	Circular connector for quick disconnect

Specifications

	250 mW power output
	500mA @28VDC
	Lightweight - 1.50 lb. (.56 kg)
	Lighting - MIL-P-7788 Type 3/5

Current Users

	Big Horn Airways
	Robinson Helicopter Company
	Siller Bros. Aviation Division
	USDA - Forest Service

Dimension Outline

Unit Width Behind Face Plate: 4.950"

Unit Height Face Plate Top to Bottom: 1.500"

Front Panel Width - Standard Dzus Mount: 5.750"

Unit Length behind Front Panel to Rear: 5.031"

Allow Up to 2.500" for Rear Connector and Cable Clearance

ACS 2010 Custom Configuration

Required Information to order the ACS 2010

The information below must be completed to process your order. Should you have any questions regarding the appearance or functions of the unit, please contact the factory.

1) Receive Audio legends

Fill in the desired legends 1 through 5. The layout shown on the prior page is the factory standard layout. If a vertical layout is desired, please contact the factory. Knob caps and switches can be color coded. Colors available: blue, green, gray, orange, red, yellow, and white.

2) Transmit legends

Fill in the desired legends 1 through 5. The 6th position is reserved for PA. Please note that the sequence of both Transmit and Receive switches must match.

3) ICS Functions

Normal PTT ICS is standard. The second ICS toggle position (noted as “A”) can be either HOT (live) or Private ICS. Private ICS provides an additional bus for isolated communication. Circle the desired mode.

HOT ICS Private ICS

4) Voltage and Lighting

Desired voltage: 28VDC 14VDC Panel lighting: Natural White NVG

5) Specify any Options or special features desired (such as VOX)

____________________________________________________________________

NOTE: If support for non-aircraft radios is desired, please note the numbers, positions and types of radios that need to be interfaced.

____________________________________________________________________

Return to top of page

Return Home