ACS 300B Dual Audio Mixer Panel
The ACS 300B Dual Audio Mixer Panel provides full transmit, receive audio, ICS, and VOX support to the pilot, copilot, and up to 6 aircraft passengers. The ACS 300B is switch selectable to work in either RH or LH pilot configurations, and is fully plug compatible with its popular predecessor, the ACS 300. In addition, the ACS 300B has as standard our new QUICK ADJUST feature for individually controlling the receive audio volume levels.
The ACS 300B is designed to meet the requirements of the most demanding helicopter and fixed wing applications, and provides unmatched audio and ICS performance. The ACS 300B is the perfect choice for use in Law Enforcement, EMS, Forestry, and numerous other applications. As with all AirComm Audio Panels, the ACS 300B is approved for use on USFS contracts.
Product Features
 | Full support for pilot and copilot |
| VOX, PTT, and HOT ICS Modes |
| 5 Transmit positions plus PA |
| 6 QUICK ADJUST Receive audios |
| Emergency Mode operation |
| Internal Interface for non-aircraft radios |
| 14 or 28VDC operation |
| Custom panel legends |
| Connector installation kit (crimp) included |
| 1-Year full warranty |
Options
| ICS support for 6 passengers (2 of 6 will |
| have ICS and TX support) |
| Private ICS Bus |
| NVG Lighting |
| Specifications |
| 250 mW Power Output |
| 500mA @28VDC |
| Weight - 2.90 lb. (1.30 kg) |
ACS 300B Custom Configuration
Required Information to order the ACS 300B
The information below must be completed to process your order. Should you have any questions regarding the appearance or functions of the unit, please contact the factory.
1) Receive Audio legends
Fill in the desired legends 1 through 6 for each user. The layout shown on the prior page is the factory standard layout. If a vertical layout is desired, please contact the factory. Knob caps and switches can be color coded. Colors available: blue, green, gray, orange, red, yellow, and white.
2) Transmit legends
Fill in the desired legends 1 through 6 for each user. The 6th position may be used for PA. Please note that the sequence of both TX and RX switches must match.
3) ICS Functions
VOX and Normal PTT ICS are standard. The second ICS toggle position (noted as “A”) can be either HOT (live) or Private ICS. Private ICS provides an additional bus for isolated communication. Circle the desired mode.
HOT ICS Private ICS
4) Voltage and Lighting
Desired voltage: 28VDC 14VDC Panel lighting: Natural White NVG
5) Specify any Options or special features desired
__________________________________________________________________
NOTE: If support for non-aircraft radios is desired, please note the numbers, positions and types of radios that need to be interfaced.
___________________________________________________________________
Return to top of page