ACS PA100D

Home

Audio Accessories

Authorized Dealers

Connector Kits

Contact

Customers

Dual Audio Mixers

Intercom Expansion Units

NEW!!!  Product Manuals

Misc. Products

PA/Siren Systems

Prices

Product Listing

Repair Service

Single Audio Mixers

SPEAKERS

Warranty

 

 

 

 

 

ACS PA100D PA/Siren System

ACS PA100F/D Control Head

         

ACS PA100D Dual Amplifier

ACS PA100D PA/Siren System

The ACS PA100D PA/Siren system provides up to 200W of PA or Siren audio. The system consists of a compact, panel mounted Control unit and a remote mounted Dual Amplifier. Built to withstand demanding helicopter applications, the ACS PA100D PA/Siren system offers outstanding performance with minimal weight and space requirements. The ACS PA100D is a proven performer in Law Enforcement, EMS, Forestry and Utility applications, and is approved for use on USFS contracts.

The ACS PA100D can be used with any of the External Loudspeakers offered by Air Comm Systems — TS100, TS200Y, and CP100V Modified.

Product Features

bullet200 Watt output
bulletManual, Wail, and Yelp siren modes
bulletPA and Radio transmission modes
bulletClean, clear audio output
bulletCompact Dzus mount control unit
bulletRemote mounted Dual Amplifier
bullet14 or 28VDC operation
bulletColor coded knobs and switches
bulletLighting - MIL-P-7788 Type 3
bulletConnector installation kit (crimp) included
bullet1-Year full warranty

Options

bulletNVG Lighting
bulletCustomer defined features

Specifications

bullet200W Power Output
bullet500mA @28VDC (Manual)
bulletControl - 1.00 lb. (.45 kg)
bulletAmp - 6.00 lb. (2.70 kg)
bulletDimensions - refer to outline

Current Users

bulletCalifornia Division of Forestry
bulletCalifornia Highway Patrol
bulletEddy County Sheriff
bulletNew York State Police

ACS PA100D Dimension Outline

Unit Width Behind Face Plate:  4.950"

Unit Height Top to Bottom Faceplate:  1.875"

Front Panel Width - Standard Dzus Mount:  5.750"

Behind Front Panel to Rear:  4.550"

Allow up to 2.500" for Rear Connector and Cable Clearance

 

Amplifier width:  4.900"  Amplifier height, Top to Bottom of Tray:  5.100"

Amplifier Unit Depth - Front to Rear Connector:  9.680"

ACS PA100D Control Unit Connector Schematic

Note 1: All wiring harnesses should be constructed of Tefzel aircraft wire (M22759/16 grade). All wires to be to the wire gauge as noted above. Shielded wires are to be used where noted. Protection against chafing and wear should be taken by using cable jacketing or sleeving. Prior to completion of installation, verify that all connector pins are seated properly and the mating connector is securely attached. Important — please note the power of the unit before installing; it will be either 14VDC or 28VDC and clearly marked as such on the unit’s data tag

Note 2 : Due to varying configurations and options available, the above schematic is for reference purposes only. Please refer to your installation documentation or call Air Comm Systems to verify your connector schematic.

ACS PA100D Amplifier Unit Connector Schematic

Note 1: All wiring harnesses should be constructed of Tefzel aircraft wire (M22759/16 grade). All wires to be to the wire gauge as noted above. Shielded wires are to be used where noted. Protection against chafing and wear should be taken by using cable jacketing or sleeving. Prior to completion of installation, verify that all connector pins are seated properly and the mating connector is securely attached. Important — please note the power of the unit before installing; it will be either 14VDC or 28VDC and clearly marked as such on the unit’s data tag.

Note 2 : Due to varying configurations and options available, the above schematic is for reference purposes only. Please refer to your installation documentation or call Air Comm Systems to verify your connector schematic.

Return to top of page