ACS PA100F

ACS PA100F PA/Siren System

ACS PA100F/D Control Head

ACS PA100F Amplifier

ACS PA100F PA/Siren System

The ACS PA100F PA/Siren system provides up to 100W of PA or Siren audio. The system consists of a compact, panel mounted Control unit and a lightweight, remote mounted Amplifier. Built to withstand demanding helicopter applications, the ACS PA100F PA/Siren system offers outstanding performance with minimal weight and space requirements. The ACS PA100F is a proven performer in Law Enforcement, EMS, Forestry and Utility applications, and is approved for use on USFS contracts.

The ACS PA100F can be used with any of the External Loudspeakers offered by Air Comm Systems — TS100, TS200Y, and CP100V Modified.

Product Features

	100 Watt output
	Manual, Wail, and Yelp siren modes
	PA and Radio transmission modes
	Clean, clear audio output
	Compact, Dzus mount control unit
	Remote mounted Amplifier
	14 or 28VDC operation
	Color coded knobs and switches
	Lighting - MIL-P-7788 Type 3
	Connector installation kit (crimp) included
	1-Year full warranty
	Options
	NVG Lighting
	Customer defined features

Specifications

	100W Power Output
	500mA @28VDC (Manual)
	Control - 1.00 lb. (.45 kg)
	Amp - 3.50 lb. (1.58 kg)

Current Users

	Arizona Dept. of Public Safety
	California Division of Forestry
	California Highway Patrol
	DEA
	Louisiana Pacific Flight Dept.
	New York PD
	Petroleum Helicopters Inc.
	Riverside County Sheriff

ACS PA100F Dimension Outline

Unit Width Behind Face Plate: 4.950"

Unit Height Top to Bottom Faceplate: 1.875"

Front Panel Width - Standard Dzus Mount: 5.750"

Behind Front Panel to Rear: 4.550"

Allow up to 2.500" for Rear Connector and Cable Clearance

Amplifier width: 4.900" Amplifier height, Top to Bottom of Tray: 5.100"

Amplifier Unit Depth - Front to Rear Connector: 7.500"

ACS PA100F Control Unit Connector Schematic

Note 1: All wiring harnesses should be constructed of Tefzel aircraft wire (M22759/16 grade). All wires to be to the wire gauge as noted above. Shielded wires are to be used where noted. Protection against chafing and wear should be taken by using cable jacketing or sleeving. Prior to completion of installation, verify that all connector pins are seated properly and the mating connector is securely attached. Important — please note the power of the unit before installing; it will be either 14VDC or 28VDC and clearly marked as such on the unit’s data tag

Note 2 : Due to varying configurations and options available, the above schematic is for reference purposes only. Please refer to your installation documentation or call Air Comm Systems to verify your connector schematic.

ACS PA100F Amplifier Unit Connector Schematic

Return to top of page